How to Replace 2000 Honda Accord Headlight Bulbs

Led bulb mostly are available for headlights, it increases light output over standard headlights. The brightness is up to 100% than standard halogen headlight bulbs. In the United States, there are a direct replacement kits fully used on-road legal.

When a headlight goes out, you must change it as soon as possible. It can be dangerous for you and other drivers to be without a headlamp after dark. Most superstores and all auto parts stores carry replacement headlights. With these steps, you will be able to change the headlights on your 2000 Honda Accord.

How I Do:

1. Open the hood of your Honda, with the bell prop to keep it open.
2. Use the flashlight to illuminate the back of the headlight that needs to replace.
3. Remove the radiator coolant reservoir by sliding it up and out of the way. The hose will remain attached. The coolant reservoir is an opaque plastic container. The cover will be labeled as the engine coolant.
4. Squeeze the power supply and pull firmly to remove. The power supply is a black plug on the back of the headlight assembly.
5. Hold the bulb and turn counterclockwise to remove it.
6. Using a soft cloth, place the new h4 bulb led conversion kit, and turn clockwise to secure it.
7. Reconnect the power supply and test the new led car light bulb.
8. Replace the radiator coolant reservoir and close the hood.

Tips and warnings

• Use a soft cloth to keep your new bulb. The oils in your skin can shorten the life of the bulb.
• Headlight bulbs are very fragile. Be careful not to drop or hit the bulb.
• It is possible to technology with a new electronic flasher unit as well when the LED is installed. It is better to acquire some OEM light bulb metal brackets to mount the unit. The ground wires come out form the headlight, it can allow you to wire the strip directly into the headlights. It also offers the chance to wire it to other switches.